7
Use of the irrigation bar for grass
The irrigation bar for grass is a handy accessory that can be mounted upon need, which allows
to simplify the distribution of fertilizer and the control of weeds on large surfaces. The bar can
be used with 2 setups: a closed setup, with 4 nozzles, and an open setup, with 6 nozzles. Six
sealing disks are also supplied, so that the operator has the chance to choose wich nozzles to
use and which ones to seal (i.e. use onlye the external nozzles).
Towing the pump with the drawbar
The drawbar is a handy accessory that can replace the handles and allows to connect the pump
to small gardening tractors and easily cover large surfaces with minimum effort.
102
Art. 303 / Art. 304
Wheelbarrow battery pump 80 L and 100 L
Usage
Art. 303 / Art. 304
Wheelbarrow battery pump 80 L and 100 L
Cleaning and maintenance
After each use, the pump must be cleaned to prevent corrosion and sprayer blocks caused by
pesticide liquids. Furthermore, regular cleaning of the product can prevent damage to crops in
the event that a product mixes with the previously used one.
Clean the surface of the pump with a damp cloth. Fill the tank with water and shake the pump,
then operate it in order to spray out the liquid or to evacuate it through the drain plug. The filters
of the tank can be removed for cleaning with water.
Drain plug
Unscrew the drain plug to drain all the water used to clean / rinse
the pump. Screw the cap back on after cleaning.
Filter cleaning
If there is liquid in the tank, close the valve (2) before opening the
filter (1) for cleaning. Once the valve is closed, the filter can be
removed and cleaned with water.
8
103