Tips Before Installation; Wall Installation - Orbegozo CM 8000 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CM 8000
13. Open window function button.
14. LED light button.

TIPS BEFORE INSTALLATION

Remove all packaging and check that all parts in the "Parts included" section are in the box. There are small
pieces, keep them away from children. We recommend you leave the small parts in a box or boat while you
are assembling it to avoid losing any.

WALL INSTALLATION

Place the fireplace on a flat, stable, heat resistant wall. Place it at least 1 meter away from furniture, curtains
or other flammable material. If you place the device in a hole, make sure that there is 600 mm of free space
above and 200 mm on each side to ensure good air circulation.
The appliance must not be placed on top of an outlet. The plug must always be accessible, in case you want
or disconnect the device for cleaning or maintenance.
Note: when you use the fireplace for the first time, it will emit a slight smell. It is normal and will soon
disappear.
Important: the upper part of the fireplace must be at least 600mm from the ceiling or other objects. The
sides of the appliance must be at least 200mm from the wall or other objects. The lower part of the device
must be at least 300mm from the floor. A ground distance of 600mm is recommended to have an optimal
view of the fire.
Mounting the fireplace on the wall
This appliance is designed to be permanently mounted on the wall at least 300mm high. The wall bracket
must be mounted horizontally and if possible with the wall socket on the right (for better access to it).
Before fixing it to the wall, make sure that it can support the weight of the appliance.
Step 1: check that the chimney is disconnected and unplugged from the network.
Step 2: Open the mounting kit and check that everything is correct.
Step 3: place the wall bracket on the wall so that the inclined side is at the top, it is the correct position. Use
a pencil to mark the position of the 3 screws through the holes in the wall. Check that the marks are level
before making the holes.
16
Tabla de contenido
loading

Tabla de contenido