Adjusting Brightness - Eizo FlexScan HD2442W Manual Del Usuario

Prior to use

Adjusting Brightness

BrightRegulator
The screen brightness is automatically adjusted corresponding to both the brightness of the image and the environmental
brightness detected by the sensor at the lower side of the monitor.
Attention
• Do not cover the sensor.
Manual Setting
1
Touch of the operation switch.
The Setting menu appears.
2
Select the <Color> icon and tap the slide bar.
The <Color> menu appears.
3
Select the <Brightness> icon and tap the slide
bar.
The <Brightness> menu appears.
4 Trace the slide bar left and right to adjust the
brightness.
Tracing the slide bar to the left makes the brightness dark and
right does it bright.
5
Tap the slide bar at the desired brightness.
The specified brightness is saved.
6
Touch .
The Setting menu quits.
NOTE
• The <Brightness> menu can be displayed from the shortcut menu. (see page 7)
The basic settings and adjustments are completed. For advanced settings/adjustments,
refer to the User's Manual on the CD-ROM.
14
Installation Setting/Adjustment Troubleshooting
Color menu
Brightness menu