Basic Operation; Switch On; Unlock The Screen; Lock The Screen - Nevir NVR-TAB7D S5 Manual De Usuario

6 Charger Port
7 TF Card
8 Speaker
9 Reset

1.2 Basic Operation

1.2.1 Switch On

When the device is in the OFF mode, press and hold "Power" key for 3 seconds to enter the Android startup
progress bar, then you can enter to the system desktop.

1.2.2 Unlock the screen

Please press and drag the

1.2.3 Lock the screen

When the device is in the ON mode, press the "POWER" key shortly, the system will lock the screen and enter
the save power mode. Then the screen is OFF but the system will still operational.

1.2.4 Switch Off

When the device is in the ON mode, press and hold the "POWER" key for 3 seconds, the screen will display the
power off interface, choose the power off item to confirm, the system will shut automatically.

1.2.5 Battery Charging

Insert the micro port of the battery adapter into 220V AC slot on the device, and connect the other side with the
power socket. Then, you can charge the device.
[Note] This device is not recommended to use USB interface to charge, please must use the special power
adapter for charging. You should charge the battery for at least 8-12 hours to make sure the battery is fully
charged at the first time. On charge the Power indicating lamp of the device is in high light blue color, the
desktop icon of the battery

1.2.6 Switch Input Methods

The device support handwriting, number, letter, pinyin etc. switching follow:
Click any text input area of the working program interface, it will popping input keyboard interface, as shown
below:
To avoid damaging, recommend use of the special
charging equipment
TF Card Slot
Built-in Speaker
Reset key
icon to the , then the LCD will unlocked automatically
keep rolling which shows it is connected to the device.
21