Beta 1937N20 Manual De Uso E Instrucciones página 11

PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk
analysis survey if the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM TO
VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS ACCORDING TO THE VALUES FOUND
IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE SURVEY
WEAR PROTECTIVE HELMET
TECHNICAL DATA
POWER
FREE SPEED
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (ø)
MEAN AIR CONSUMPTION
WEIGHT
LENGTH
HEIGHT
BELT SIZE
NOISE (ISO 15744)
SOUND POWER LEVEL
SOUND PRESSURE LEVEL
VIBRATIONS (ISO 28927)
VIBRATION LEVEL
Uncertainty
KEY TO SYMBOLS
a: air inlet 1/4" GAS
b: sander start lever
c: safety lever
d: air outlet
e: sander guard
f: belt direction of rotation indicator
g: belt arm
h: belt alignment screw
INSTRUCTIONS
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air (picture 6-a). Excessively high pressure or humidity in supply air results in shorter life
for the mechanical parts and may damage the tool.
0.45 kW
16,000 rpm
1/4" GAS
6.2 bars
10 mm
400 l/min
1.6 kg
226 mm
145 mm
20X520 mm
LwA = 84 dB
LpA = 92 dB
2
0.8 m/s
2
K=0.48 m/s
i: belt wheel
l: arm adjustment locking screw
m: belt release spring
n: sand belt
o: hexagon key wrench
p: speed adjusting screw
q: oil lubrication