Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Thank you for buying our product. Please attentively read this before operating the machine. Keep this
operation manual for future reference.
1. Use the heater on flat surfaces not titling or upsides down. No use underneath socket directly.
2. Do not use your heater in the presence of explosive or flammable substance.
3. It is absolutely necessary ensure the following:
-
The socket is not used to the heater and other high power electrical appliance at a time.
-
The cord is rated for at least 10 AMPS.
-
Tight connection between plug and socket so as to avoid the overheating plug and malfunction.
-
Unplug heaters by grasping plug and pulling it from the socket. Never yank on cord.
-
Carefully use when children, old man, disabled man inside solely. No use when no supervision.
-
Our factory, if damaged manufactures the power cord and plug; Return the heater to the
approved service agent for changing.
-
Caution: Do not drape anything on your heater when in use.
- Do not use this fan heater in the immediate surroundings of a bath,,a shower or a swimming pool.
- Do not cover.If covered,there is the risk of overheating.
-
OPERATING UNSTRUCTIONS
1. Plug into any 220V~50Hz, AC source.
2. Your heater is equipped with a 4-position rotary switch
SYMBOL
FUNCTION
0
OFF
*
BLOW COOLING AIR
I
HALF HEAT OUTPUT
II
FULL HEAT OUTPUT
Set the rotary switch to maximum for fast warm up of a room. Once the room is comfortable, select a
lower setting to reduce electrical consumption and to prevent the room
3. from becoming too warm.
4. Adjust the thermostat to maximum and select the desired power setting. Once the room is
comfortable, rotate the thermostat counterclockwise, until the heater shuts off. The thermostat
will now maintain the temperature by cycling the heater on or off. During particularly cold
weather, the low power setting may be insufficient to satisfy the thermostat. Select a higher
setting for these periods.
5. Before switching off and better work for 5-10 second in cool condition.
To avoid damage and danger by overheating, your heater is fitted with super protector that switch as
off the heater in the event of overheating until the temperature drops to some extent.
P-2
SAFETY CONTROL
Tabla de contenido
