Retrieving Parameters During The Charge Acceptance Test; Charge Acceptance Test Finished - Battery Ok - Fronius Acctiva Professional Flash UCN US Instrucciones De Uso

Retrieving para- 1.
meters during the
charge accep-
tance test
Charge accep- 1.
tance test fini-
shed - battery OK
2.
Press the info button to display the parameters in the following sequence:
- actual charging current
- actual battery voltage
- amount of charge (Ah) fed in so far
- energy (Wh) fed in so far
- time that has elapsed since the start of the test (hh:mm)
After the charge acceptance test has been carried out the device will switch auto-
matically to standard charging mode and charge the battery
E.g.: actual charging
current
Press the Info button to view stored test parameters and the actual charging para-
meters.
Charging parameters:
E.g.: actual battery voltage
E.g.: energy fed in
Test parameters: can be identified by the test symbol
E.g.: charging current
E.g.: set battery capacity
- the top half of the display features
progress bars to show the progress of
the current charging operation.
- the bottom half of the display shows
the current charging parameters /
calculated test parameters
E.g.: amount of charge fed
in
E.g.: length of time charging
so far
E.g.: battery voltage
E.g.: Battery's capacity to
accept charge, expressed
in %
17