Configuring The Clock - Soler & Palau ADVANZ Instrucciones De Uso

Repeat the change window procedure to return to the Program screen (6).
Setting the speed
Low, Medium and High speed preset values can be changed from the Program menu by selecting the
corresponding parameter (turn the knob and scroll until the parameter to be changed is highlighted, then
press the knob) and selecting the desired value by turning the knob. When the desired value is displayed,
press the knob to confirm the choice. The three parameters can take one of the following values:

off

a percentage value between a minimum and 100% for units with variable speed fans; 1, 2 or 3
for units with 3-speed fans;

auto for units with air quality or relative humidity probe.
C
ONFIGURING THE CLOCK
The clock window is accessed when the clock item in the selection menu is selected.
Menu / Clock
Configuring the day
- turn the knob until the day item is selected: it will be bright against a dark background
- press the knob: the currently configured day will flash
- turn the knob to configure the day desired
- press the knob to confirm the configuration: the day will be displayed as a bright writing against a
dark background.