Internal Layout (Positioning, Adjustment, Removal); Activation And Use Of The Ice Maker - Fhiaba XS8990TST6IU Manual De Usuario

7. ACTIVATION AND USE OF THE ICE MAKER

6.1 Internal Layout (positioning, adjust-
ment, removal).
Fresco Drawer
1T / 0T / 0H models
Fixed to the slide guides with two thumbscrews.
> to remove the drawer, unscrew the thumbscrews
and remove the drawer.
www.fhiaba.com/us/use-and-care/
video "Care and cleaning".
TriMode Drawer
1T / 0T / 0H models
The upper TriMode can be removed using the same
method used for the Fresco drawer. To remove the
inner TriMode drawer unscrew the thumbscrews
When replacing the drawers, make certain the
back of the drawers engage under the clips on the
slide guides.
Ice Tray
Located in the upper drawer of the freezer compart-
ment on some models it is fixed with locking panels.
> after removal, make sure to reposition it correctly.
28 www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
Warning
Do not place hands or fingers near the Ice-
maker when in function.
Shelves
The shelves are sliding and can be easily re-posi-
tioned by the user as follows:
> release the locking knob by turning i anti-clockwise
> lift or lower the shelf to the desired position
www.fhiaba.com/us/use-and-care/
video "EvenLift".
> re-tighten the locking knob. To remove a shelf it is
necessary to slide it up to the top
Door Shelves
1T / 0T / 0H models
The door shelves can be easily removed for cleaning
> Hold the door shelf at the sides and push it upwards
to release it from its seat, then pull it outwards.
> Reverse the procedure to reinstall.
www.fhiaba.com/us/use-and-care/
video "EvenLift".
models 1T / 0T / 0H / 0F
2
1