Connecting The Power; Radio Operation - Premier SX-1849DG Manual De Instrucciones

Radiograbadora
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WWW.PREMIERMUNDO.COM

CONNECTING THE POWER

AC POWER OPERATION
Before connecting the unit to an AC Outlet, check that the operating VOLTAGE of the unit is identical with the
VOLTAGE of your Local Power Supply.
Connect the supplied AC Power Cord to the AC Socket at the back of unit.
When the AC Power Cord is plugged into the Batteries are automatically disconnected.
BATTERY OPERATION
The unit cannot be operated by battery when the AC power cord is connected.
Open the battery cover and put the batteries as indicated inside the battery compartment.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.
Use only the size and type of batteries specified.
2.
Be sure to follow the correct polarity when installing the batteries as indicated in the batteries
compartment.
3.
Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4.
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5.
Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer's directions)
CLOCK FUNCTION
When the unit is switched on, time "12:00" will be appeared on the LCD display and time is starting to run.
TIME SETTING
Press and hold on the "CLOCK SET" button then press the "HOUR" and "MIN" button to set your desired
time.

RADIO OPERATION

1.
Select the FUNCTION switch to the "RADIO" position.
2.
Set the Band switch to the desired band position.
3.
Turn in desired radio station.
4.
Adjust the VOLUME, if necessary.
5.
To turn off the radio, set the FUNCTION switch to the "TAPE (Radio Off)" position.
Page 6
Tabla de contenido
loading

Tabla de contenido