Choosing A Channel; Channel Scan Feature - Motorola TLKR T3 Manual Del Usuario

TLKR_T3.book Page 7 Monday, September 3, 2007 1:56 PM
Normal Channel

Choosing a Channel

In order to speak to someone, each of you must
set to the same channel.
To choose a channel:
Enter the Menu. Press the or
increase or decrease the channel number
displayed. If you press and hold the
key, the channel number increase or decrease
continuously.
Press PTT button to select channel.
Scan Mode Monitor Mode
Start Start
Scanning Monitoring

Channel Scan Feature

Your PMR Low Tier radio has a channel scan
feature that allows you to easily scan all 8
channels. When an active channel is detected,
the radio will pause on that channel until the
key to
channel is clear. Then after a 2 second pause,
the radio will continue scanning. Pressing the
PTT key while the scan is paused on a channel
or
will allow you to transmit on that channel.
To turn the channel scan ON:
Enter the Mode Menu. Advance through the
menu until icon blinks. Press
To turn the channel scan OFF:
Press the MENU/ or PTT key.
Normal
/ key.
7