Product Description (Fig. 1)
A. Dryer body
C. Front cover
E. Universal power socket
Overheat protection
This device has a thermostat that regulates the temperature
to prevent it from overheating (if the air inlet or outlet is
blocked). If this happens, disconnect the device and wait for
five minutes. Remove the cause of the obstruction and switch the
appliance back on.
Wall mounted Installation
Option 1 – see Fig.2
1. Position the unit on the wall as template and mark with a pencil the two
holes to be drilled.
2. Drill the two holes of 6mm on the marked points and insert the wall
bushings.
3. Position the unit and fix it by the screws.
4. Cover the screw holes with the screw covers.
Option 2 – see below image
B. Spring button
D. Back plate
Fixed base screw hole
Fixed base screw hole
3
English