Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Cares with the blade:
ATTENTION
A. In order to carry out any repair, maintenance or cleanliness, turn the engine off, disconnect the mower
from the power supply and wait until the blade had stopped rotation. Always use safety gloves to avoid
injuries.
B. Check if the cutting blade is fixed and sharp.
C. Should you need to change the blade, always wear thick protection gloves and observe if the plug is not in
the socket.
NOTE: It is recommended that end users go to a SCHULZ AUTHORIZED DEALER to change the blade.
3. Transporting and storing:
A. Never use the cord for carrying, pulling or unplugging the power tool or allow its contact with edges, sharp
elements, rough surfaces, oil or chemicals that may damage its fl exible and insulating properties.
B. Always place the blade cover on the blade before storing or transporting the hedge trimmer, to avoid the sharp
teeth of the blade.
C. Store the tool in a clean, dry place protected from moisture and dust. Keep your tool out of reach of children
and people unfamiliar with the use of the equipment.
4. Repairs:
If required to perform any repair or replacement of the electric motor brushes, contact the nearest Schulz Autho-
rized Dealer. Original parts Schulz must be used. The use of non-original parts results in warranty loss and may
cause damage to the equipment or injury.
9. CORRECTIVE MAINTENANCE
To guarantee product SAFETY and RELIABILITY, repairs, maintenance and adjustments must be performed by the
nearest SCHULZ AUTHORIZED DEALER, which uses genuine parts.
10. ENVIRONMENTAL ORIENTATIONS AND RECOMMENDATIONS
Disposal of solid waste (parts in general and product packaging)
The generation of solid waste is an aspect that the user must take into consideration, in the use and mainte-
nance of the equipment. The environmental impacts can cause significant changes in soil quality, in the quality
of superficial and underground water and in the population's health, through the improper disposal of discarded
waste (on the streets, receiving bodies of water, landfills or vacant lands, etc.).
Schulz Compressores S.A. recommends the management of the waste created by the product since its genera-
tion, handling, transport, treatment until its final disposal.
A proper management must consider the following steps: quantification, qualification, classification, source re-
duction, selective collection, recycling, storage, transport, treatment and final destination.
The disposal of solid waste must be done according to the regulative requirements of the legislation in vigor.
Never remove or clean the blade lâmina while the mower is running.
37
Tabla de contenido
