THERM PRO TP-65S Manual De Instrucciones página 2

Introduction
Congratulations on your purchase of the wireless indoor/outdoor humidity
and temperature monitor. You will now be able to know the outdoor/indoor
temperature and humidity while sitting inside.
EN
Hints and tips
If the receiver can't connect to the transmitter, try as following:
Repeat the synchronization process as described below.
Relocate the base station or the remote unit until connection is
established again.
Signals from other electronic devices may cause interference. Place
the base station and receiver away from these devices.
If the base station is attached to a refrigerator or a metal object by
magnet, the transmission may be shorter. Remove the base station
from the refrigerator or the metal object or place the base station and
remote sensor as close as possible.
Warnings
Do not subject the unit to excessive force, shock, dust, temperature or
humidity.
Do not immerse the unit in water.
Do not remove any screws.
Do not dispose this unit in a fire. IT MAY EXPLODE.
Keep unit away from children. The unit or parts of the unit might be a
choking hazard.
Dispose of the unit legally and recycle when possible.
Specifications
1. 433 Mhz transmission frequency
2. Transmission range up to 200 feet in open area. (range maybe shorter
based on interference present)
3. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C)
-2-
4. Outdoor Temperature range: -58°F ~ 158°F (-50 °C ~ 70 °C)
5. Humidity range: 10% ~ 99%.
6. Temperature tolerance: +/- 2.0 °F (+/- 1.1 °C)
7. Humidity tolerance: ±2% from 30% to 80%; ±3% below 30% and above
80%
8. Power: 2 X AAA batteries 1.5V for base unit and 18650 lithium battery
3.7V for remote sensor
Components
1. One base station unit (Receiver).
2. One remote sensor (Transmitter).
3. One charger (For Transmitter).
* Although the remote sensor is designed to be rain-proof, it still
must be always put in a dry place to avoid direct rainfall.
Indoor base station (receiver) features
Large LCD display
Remote Low
Battery Icon
Outdoor
temperature
Base Station
Low Battery Icon
Indoor
Indoor
humidity
temperature
Four Touch Buttons
1. LCD display: Displays the current outdoor temperature and indoor
humidity/temperature
2. Battery Compartment: Holds 2 AAA batteries to power the unit
3. Tabletop and wall-mounted design
4. Indoor Temperature range: -4°F~158°F(-20°C~70°C).
Magnet
SIDE
Wall Mount
Stand
Battery compartment
-3-
EN