Unitekno C500A Manual De Uso página 13

MACHINE PARTS AND CONTROLS
> Steam/suction cleaning kit
22
STEAM/SUCTION HANDLE UNIT
The unit consists of a connector, a flexible tube and a handgrip.
The connector is inserted in the suction/steam socket (4). To
remove it, press the external clips (D). The handle contains the
on/off button for the motor (A) and the steam trigger (B). The
various cleaning accessories can be attached to the handle at
the provided bayonet base. To remove them, simply pull them
off the ring. The handle also has a steam blocking switch (C).
When this switch is on, steam cannot pass.
23
EXTENSION TUBES
The extension tubes are connected to the handle and can be
attached to the various cleaning accessories. They have diffe-
rent lengths to guarantee maximum practicality in their diffe-
rent uses.
24
FLOOR BRUSH
The floor brush attaches to the handle or extension tubes. It
consists of a central H-shaped body, a vertical joint controlled
by a button (E), a horizontal joint with a locking button (F), and
two clips mounted on slides (G).
The H-shaped body is two-piece. It features a steam outlet
piece with a row of bristles and a suction intake piece.
Press the button (E), to rotate the head 180° on a vertical axis
and place the suction piece or the steam outlet piece in the
forward position. Press the locking button (F) (pushing forward)
to rotate the floor brush connector on a horizontal axis. The
slides on which the clips are mounted can be lowered (outside
position) or raised (inside position).
25
FABRIC BRUSH
The fabric brush can be attached to the handle or the exten-
sion tubes. It consists of a central body and a moveable plate
containing a brush. It is equipped with a joint that can be
moved by pressing the button (F).
26
NOZZLE
The nozzle can be connected to the handle or the extension
tubes. It consists of the main body, which contains the steam
outlet, and a moveable suction opening. By moving the suction
opening to the back position, you can attach the round brushes
to the nozzle.
27
ROUND BRUSHES
Round brushes can be inserted into the nozzle steam outlet
by using a little pressure. To remove them, simply pull them
out.
28
TRANSPARENT NOZZLE
It is connected to the same support as the water-jet pipe and
may be used with the brush.
29
GLASS WIPER
The glass wiper can be attached to the handle or the exten-
sion tubes. It is equipped with steam holes and a dirt-scraping
rubber blade.
30
CARPET PLATE
It is inserted at the base of the floor brush. The wheels have
2 positions to adapt to different types of carpets. Press the L
keys to adjust height.
12
STEAM/VACUUM
31
TRANSPARENT MOUTH
This accessory can be connected to the handle or extension
tubes. The suction is maximized thanks to its narrow and flat
aperture.
> Optional kit
Additional cleaning and ironing kits can be attached to the ma-
chine. Please refer to the specific instructions.