50
ENGINE OPERATION
ENON00921-0
Note
Before tilting the outboard motor up, after
stopping the motor leave it in the running
position for about a minute to allow water to
drain from inside the engine.
ENOM00062-A
Manual Tilt type
Tilt up
With the shift lever in Neutral or Forward,
fully tilt the motor up toward you by hold-
ing the tilt handle provide at the rear of the
top cowl. Then slightly lower the motor for
locking in the up position.
7
1. Tilt lever
2. Tilt up position
3. Shalow water operating position
ENOM00063-A
Tilt down
Slightly tilt the motor up, and pull the tilt
lever toward you to release the tilt-lock.
Then lower the motor slowly.
1. Tilt lever
2. Tilt up position
3. Tilt down position
N
ENOM00564-0
Manual Tilt RC type
Tilt up
1. Put the control lever to the Forward (F)
ENOF00543-1
1
2
1. Control lever
3
2. Tilt the outboard motor all the way up
ENOF00544-0
position.
N
1
until it is in tilted - up position.
1
2
3
ENOF00545-1
ENOF00879-0