MAG MG3000 Instrucciones De Uso página 56

1 Loosen and remove the closing screw in the air filter cover.
2 Open the cover and extract the filtering element.
FILTER CLOSING SCREWS
3 Clean the filter in a water and soap solution. Allow it to dry completely.
4 Dip the dry filter in oil, the same type used in the generator engine.
4 Drain by pressing the air filter with your hand.
6 Once cleaned and drained, install the filtering element in the filter box and
close it with the cover closing screw.
FILTERING ELEMENT
22
FILTER COVER