ITALY
First Choice When Quality Matters
W
• Manifold:
- Forged Brass: Strength and no porosity
– long life. Higher hydrostatic pressures – safety,
performance.
- Inlet and Discharge Ports: Heavy bosses for added
strength.
- Offset Discharge Ports: High efficiency, smooth
flow.
- Bolts: Eight bolts, 10mm, grade 8.8.
• Valves:
- Ultra Form Cages: Durable, strength, and long
life.
- Poppets, Seat and Spring: 303 and 400 series
stainless steel.
- Valve Caps: Forged. P
• Packing and Plungers:
- High Pressure Packing: "V" style (D-1) Buna-N
(cotton duct weave base) strong and tightens under
load.
- Low Pressure Seals: "U" cup double lip Buna-N
for a good positive seat.
- Support and Guides: Machined brass, 2-piece
construction to assure proper plunger alignment
and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend,
solid ceramic for long life, strong durability and
more resilient.
D
• Bearings: Oversized for maximum life and load
disbursement
• Bearing Support: Precision die-cast and
machined to assure concentricity and alignment.
• Crankcase: Precision die-cast, large cross head
for strength, large cooling fins and anodized (for
maximum heat dissipation).
• Rear Cover: Precision die-cast, O-ring sealed
and bayonet style sight glass for positive sealing
and locking (no threads to loosen).
It is prohibited to reproduce, copy or use this document without written permission from Stock Garden Spain (GENERGY), Spain, 2009.
46
GAS POWERED PRESSURE WASHER
S
PECIAL
E
ET
ND
V
C
D
ATENTED
ALVE
AP
ESIGN
E
RIVE
ND
M
: SXW21.35 - 1450
ODEL
F
EATURES
• Plunger Rods: Stainless steel construction for
strength (no plating to scrape off), back-up and O-
ring plunger sealing system.
• Rod Pins: Precision ground and hardened steel,
oversized for load disbursement.
• Connecting Rods: Heavy 2-piece special alloy
aluminum based, oversized for maximum strength,
load disbursement, and life. Heavy pin area
construction, for added load strength.
• Crankshaft: Forged, precision ground and
hardened for extremely long life and durability.
• Oil Seals and O-rings: All are constructed of
Buna-N rubber. The O-rings have stainless steel
garder springs to assure constant tension on the
sealing surface.
• Oil Capacity: 32 oz.
E
XTRA
• Dyno Proven: All pumps are dyno tested to
assure the theoretical design meets the actual
design.
• Valve Design: Each pump series has a
design that optimizes its highest efficiency.
• Hot Water: High temperature kits are available
to 180ºF. Refer to breakdown.
• Wet End Repair: Very simple no special tools
required.
• Design: Using advanced fluid handling design
programs. Overall pump efficiency is increased.
RPM
F
EATURES
valve