Installation And Assembly - edenox PL-211 Manual De Instrucciones

2.4 MANUFACTURER'S IDENTIFICATION LABEL DESCRIPTION.
2.5

INSTALLATION AND ASSEMBLY

INSTALLATION ON A WORKTOP OF THE OWNER:
Attached to this manual you will fi nd the holes that should be made on the worktop depending on the gantry
model (2, 3, 4 or 5 GN).
The gantry must be then fastened down with the bolts provided.
Installation on a component of the Drop-in range by Edenox:
The lower side of each component is marked with the diameters and location of the holes to be made (see
illustration).
Once the electricity connections have been threaded through the gantry, fasten down using the supplied
bolts.
4 edenox.com
Data in the identifi cation label:
Serial number (code+year+serialnumber)
Code: 38721XX
Model: PL-
CE symbol
Waste disposal symbol
Manufacturing site
Voltage: 230V- 1N- 50-60Hz
Power consumption
ENGLISH