Troubleshooting; Assistance And Service; Contact Information - Philips Saeco CA6805/47 Manual Del Usuario

8 Troubleshooting

This chapter summarizes the most common
problems you could encounter with this
coffee grinder.
The appliance does not work.
• Make sure that the plug is inserted correctly
and the electrical outlet works properly.
• Check if the lid of the bean hopper is placed
correctly and closed properly.
• Check if the ground coffee container is
positioned correctly and if the lid of the
ground coffee container is placed correctly
on the container.
The appliance stops during operation.
• The appliance overheated. The resettable
thermal fuse of the motor was activated.
To reset the thermal fuse, allow the appliance
to cool down for approx. 30 minutes.
To avoid overheating, do not exceed the
MAX indications of the bean hopper and
the coffee bean container.
The grind selection knob does not work.
• Check if the upper burr is correctly
positioned in the bean hopper
(see chapter 'Maintenance' ).
My drip-filter coffee tastes too bitter.
• Select a coarser grind.
10
My drip-filter coffee tastes too strong.
• Select a coarser grind or use fewer
coffee beans.
The filter is blocked or overflows.
• Select a coarser grind or use fewer coffee beans.
Small coffee particles end up in my drip-filter coffee.
• Select a coarser grind and stop using a
permanent filter.
My drip-filter coffee tastes too mild.
• Select a finer grind or use more coffee beans.
After brewing, part of the coffee grounds is
still dry.
• Select a finer grind or use more coffee beans.
The coffee flow of my espresso machine is
dripping or there is no flow of coffee at all,
during brewing.
• Select a coarser grind.

9 Assistance and service

For assistance and service, please visit our website
at www.philips.com/saeco.