uniQam Scout Manual De Usuario página 5

Start the camera
1. Open the battery cover and insert uniQam Li-ion battery.
2. Insert Micro SD card. Please use high quality Micro-SD-Cards
Class10, UHS-1
3. Use the USB cable to connect the camera to your PC or use AC/DC
adapter to charge the battery. The battery is charged, when the two
red LEDs go out.
4. The waterproof housing must be checked for leaks before each use.
The seal must be clean and undamaged. Check this before each use
by a dive without the camera. We accept no liability for any damage
caused by leaks in the casing.
5. Press the ON/OFF button and hold for two seconds. The camera
turns on and LCD monitor shows camera image.
LCD screen shot
Video screen
No Function
1. Current mode
2. WiFi
3. Zoom
Field of View
4.
(FOV)
5. Memory capacity
6. Battery
7. Recording option
8. Resolution
9. Image quality
10. WiFi Hotkey
Photo screen
Description
Shows current shooting mode (video or photo)
Shows WiFi connection status
Shows current zoom level
Shows current Field of View (wide/medium/narrow)
Only use wide for photos. For videos you can use any
setting.
Shows usable memory capacity in percentage (%)
Shows battery capacity status
While shooting video or photo, it shows current
recording option
While shooting video or photo, it shows resolution
and speed
While shooting video or photo, it shows image quality
Shows WiFi connectivity (WiFi on/off )
EN
5 5