Klarstein Orfeo Manual De Usuario página 20

EN
20
Cleaning the burner assembly
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a
cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper
clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a
new burner. Reinstall the burner, check to ensure that the Gas valve orifices are correctly
positioned and secured inside the burner inlet (venturi).
In some cases, the ignition of your barbecue will go out because of an insect crawling
inside the burner venturi or a spider spinning its web inside the burner. This can be
rectified by using a bottle brush inserted through the burner venturi and pushing it into
the burner over the burner length. If condition persists consult your gas dealer.
Declaration of Conformity
Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
Germany
This product conforms to the following European Directives and
Regulations:
Regulation (EU) 2016/426