Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CARBURETOR
IDLE SPEED
ADJUSTMENT
'_LWARNING:
Keep others away
when making idle speed adjustments.
The trimmer head will be spinning
dur-
ing most of this procedure.
Wear your
protective
equipment
and observe all
safety precautions.
After making ad-
justments,
the trimmer head must not
move or spin at idle speed.
The carburetor
has been carefully set
at the factory. Adjustments
may be
necessary
if you notice any of the fol-
lowing conditions:
• Engine will not idle when the throttle is
released.
• The trimmer head moves or spins at
idle.
Make adjustments
with the unit sup-
ported so the cutting attachment
is off
the ground and will not make contact
with any object.
Hold the unit by hand
while running and making adjustments.
Keep all parts of your body away from
the cutting attachment
and muffler.
To adjust
idle speed:
Allow engine to idle. Adjust speed until
engine runs without trimmer head
moving or spinning
(idle too fast) or
engine stalling (idle speed too slow).
• Turn idle speed screw clockwise
to
increase
engine speed if engine
stalls or dies.
• Turn idle speed screw counterclock-
wise to decrease
engine speed if
trimmer head moves or spins at idle.
Idle Speed
Screw
Air Filter
Cover
Z_
_,WARNING:
Recheck the idle
speed after each adjustment.
The
trimmer head must not move or spin at
idle speed to avoid serious
injury to
the operator
or others.
If you require further assistance
or are
unsure about performing
this proce-
dure, contact your Sears Service Cen-
ter or call our customer assistance
help line at 1-800-235-5878.
18
Tabla de contenido
