Single Satellite Search; Multi Satellite Search - König Electronic SAT-SDHD50-KN Manual De Uso

2.4

Single Satellite Search

1. Satellite: Press
Or press OK to pop up the drop-down list, then
select the desired satellite in the list and press OK to
confirm.
2. FTA Only: Press
No.
3. Scan Channel: Press Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes. This
item turns grey when Auto Scan is selected in the
following scan mode item.
5. Scan Mode: Press
Scan and Preset Scan. Auto Scan is a blind scan,
while Preset Scan is to search the frequencies.
6. Search: Press OK to start searching.
2.5

Multi Satellite Search

From the Multi Satellite Search window, you can search
several satellites at the same time.
1. Satellite: All selected satellites in the satellite list
window are displayed in the lower part. Press
to switch among them.
2. FTA Only: Press
No.
3. Scan Channel: Press
+ Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes. This
item turns grey when Auto Scan is selected in the
following scan mode item.
5. Scan Mode: Press
Scan and Preset Scan. Auto Scan is a blind scan,
while Preset Scan is to search preset frequencies.
6. Search: Press OK to start searching.
to select the satellite in circle.
to select between Yes and
to select between TV +
to select between Auto
to select between Yes and
to select between TV
to select between Auto
15