Safety Information - Handicare MiniLift160 Classic Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
MiniLift160 Classic
2
3
4
14
13
10
7
9
6
MiniLift160 Classic is a mobile sit-to-stand lift which has been developed to, as gently as possible, assist the user when
rising from a sitting to a standing position. When MiniLift160 Classic is combined with the appropriate lifting accessories,
2
3
4
the user gets support under the feet, for the front of the lower legs and behind the back, which provides for a safe and
secure
sit-to-stand procedure. The construction safely moves the user forwards and upwards in a natural movement pattern
and, at the same time, the leg muscles and balance is exercised.

Safety information

Visual inspection
Inspect lift functions regularly. Check to ensure that material is free from damage.
Before use
Make certain the lift is properly assembled.
Check sling bar connection and safety latch function.
Check lifting function and base-width adjustment.
Check to ensure that the actuator is correctly installed.
Always read the user manual
Always read the user manuals for all assistive devices used during a transfer.
Keep the user manual where it is accessible to users of the product.
Always make sure that you have the right version of the user manual.
The most recent editions of user manuals are available for downloading from our website, www.handicare.com.
Under no circumstances may the lift be used by persons who have not received instruction in the operation of the lift.
It is strongly prohibited to modify the original product.
4
5
6
7
1
2
3
4
5
15
5
6
7
8
9
10
1. Lift arm
2. Hooks for lift vest/sling
3. Hand control
4. Leg support
5. Footplate
6. Rear castor wheels with brakes
7. Battery
8. Emergency stop
9. Adjustment of leg support
10. Manual emergency lowering
11. Electrical emergency lowering
8
12. Charging lamp
11
13. Locking mechanism for adjustment of lift arm
12
14. Handles
15. Front castors
NAME
DATE
hc-jope
2010-07-27
DRAWN
APPROVED BY
STATUS:
TITLE
COMMENTS:
Unless otherwise stated, general
tolerances according to ISO 2768-m
SIZE
DWG. NO.
A2
MATERIAL:
SCALE:1:4
WEIGHT:
8
9
10
11
12
A
B
C
D
E
F
G
REV.
g
SHEET 1 OF 1
11
12
U S E R M A N U A L
English
Tabla de contenido
loading

Tabla de contenido