PART NAMES AND FUNCTIONS
Allow for sufficient heat dispersion when installed on a rack.
h
Handle the power cord carefully.
h
Hold the plug when unplugging the cord.
h
Keep the appliance free from moisture, water, and dust.
h
Unplug the power cord when not using the appliance for long
h
periods of time.
Do not obstruct the ventilation holes. (For units with ventilation
h
holes)
!
10 seconds of anti-shock memory
!
Instant start
!
Seamless loop
!
Pitch range : +/-100% +/-0.1% (+/-16% for Mp3)
!
4 hot cues for Sampler and Cue memmory, <5sec.
!
Auto cue function (-48 dB)
!
500 *4 sampler (cues) can be memorized
1.Checking the Contents
Check that the carton contains the following items:
1. Main unit
2. Operating instructions
3.ARCApin cord.
4.A AC power cord.
2. Installing the Unit
1. Place your unit on a flat surface.
2. Be sure the player is mounted in a well ventilated area where it
will not be exposed to direct sunlight, high temperatures, or high
3. Connections
1) Turn off the POWER switch.
2) Connect the RCApin cord to the input on your mixer.
2
NOTE ON USAGE
Do not drop foreign objects into the unit.
h
Do not let insecticides, benzene, and thinner come in contact with
h
the set.
Never disassemble or modify the set in any way.
h
FEATURES
!
Selectable elapsed, remain and total remain time display
!
Single/continuous play
!
Relay play allows consecutive playback during two decks
!
S/PDIF digital audio RCAcoaxial
!
LCD display
!
Music Master Tempo
!
Mp3 Playback
PREPARATIONS
humidity.
3. Try to place the unit as far as possible from TVs and tuners, as the
unit may cause undesirable interference.
CAUTION:
The player will work normally when the main unit is mounted with
the front panel at within 15 degrees of the vertical plane. If the unit is
tilted excessively, discs may not be loaded or unloaded properly.
The unit panel's LCD's is designed to be clearly visible with in the
angles shown in Figure 1. Mount the unit panel so that the visual
angle is within this range.
CAUTION:
- Be sure to use the supplied cables. Using other types of cable may
result in unit damage.
- To avoid sever damage to the unit, be sure the power is off when
connections to the unit.
c d x - m p 2 0 0