Darning Stitch; To Sew; To Sew A Shorter Darning; Reverse Stitch Button Y Required Length U Starting Point - Janome Hello Kitty 18750 Manual De Instrucciones

w
q
z x c v
q
e
r
w
t
e
w
y
u
i

Darning Stitch

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:

• To sew

z Pull the button holder q to the back.
x Place the garment under the foot. Press the needle
up/down button twice. Move the fabric to the
left to draw both threads under the foot.
c Lower the foot and start the machine.
The machine will lock stitch, sew 16 rows of darning,
lock stitch again and stop automatically.
v Turn the fabric and repeat sewing.
q Button holder
w Starting point
e 3/4˝ (2 cm)
r 9/32˝ (0.7 cm)

• To sew a shorter darning

To sew a darning shorter than 3/4˝ (2 cm), first stop the
machine after sewing the required length y, then press
the reverse stitch button t.
The required length y has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
t Reverse stitch button
y Required length
u Starting point

• To sew a same-sized darning

Simply start the machine to sew another darning at the
same size.

• To sew the evenness of the darning

Correct the evenness of the darning as follows:
Press the cursor buttons to move the cursor under
the value "d5" i (default setting).
When the right side of the darn is lower than the left side,
press the button to set the value to "d6" – "d9", and
make the darn even.
When the left side of the darn is lower than the right side,
press the button to set the value to "d1" – "d4", and
make the darn even.
72
08
3 to 6
Automatic buttonhole foot: R