Call Functions; Call; Adjusting Handsfree Volume; Mute - ideus VV900 Manual De Usuario

VV900

2.5 Call Functions

2.5.1 Call

Before dialing, both your handsfree and handset must be power on. And you
also need to ensure your handsfree and handset has been linked with Bluetooth
connection.
Answer Call: Short press K2.
Reject Call: Long press K4.
End Call: Short press K2.
Redial: Long press K3.
The Blue LED gives 3 quick blinks per 2 seconds and the Red LED is off.

2.5.2 Adjusting Handsfree Volume

In the talking mode, you can short press K3/K4 to increase/decrease your
speaker volume, and the Blue LED gives 3 quick blinks per 2 seconds; Red
LED is off. You can repeat the above operation to speaker volume to a desirable
level.
Note: For most Bluetooth headset, handsfree volume control will synchronize
with the handset. That is, your handsfree volume can also be controlled your
handset, vice versa. However, this may not be always true due to variations on
handset implementations chosen by different manufactures.

2.5.3 Mute

You can mute or un-mute an ongoing call by simultaneously quick pressing K3
and K4. The Blue LED gives 3 quick blinks per 2 seconds and the Red LED is
off.

2.5.4 Transferring Calls to/from Your Handset

Transferring calls to your handset: long press K2, Blue LED gives 1 blink per 3
seconds; Red LED is off.
Transferring calls from your handset: short press K2, and Blue LED gives 3
quick blinks per 2 seconds; Red LED is off.

2.5.5 Voice Dialing

If your mobile phone supports voice dialing, you can make a call via voice
dialing from your Handsfree:
Voice Dialing: Long press K4 you will hear key tone and Blue LED gives 3
quick blinks per 2 seconds, then follow your handset user guide to complete
voice dialing.
Cancel Voice: Dialing Short press K4. The Blue LED gives 3 quick blinks per 2
seconds and the Red LED is off.
1
Fonexion Manual VV900.indd 12 4/7/07 12:03:51