Security Precautions - KLASS Fan ELECTRA DC Manual De Instrucciones

GB
Content :__________________________
1. Safety precautions
2. Parts and accessories
3. Fix hanger bracket
4. Blades assembly
5. Downrod, canopy, and coupler installation
6. Power supply
7. Fitting the fan
8. Remote control functions
9. Balancing the fan
10. Winter/Summer Function
ATTENTION___________________________________
Non-isolated "Dangerous high voltage" inside the device. To prevent electric shocks, unprofessional personnel are prohibited from
opening the case
Components and safety parts must be replaced by original parts of the same brand. There are no serviceable parts, without the
intervention of a professional, inside the device. Please ask a trained professional to work on your fan.
Attention !
This product is designed to be used only with the parts supplied with this product and / or accessories specifically intended for use with this product. Use
of parts and / or accessories not designated for use with this product may result in personal injury or property damage.

Security Precautions

Installation must be done by a qualified installer. If you install this product yourself, you are responsible for the installer
1. Turn off the power before assembly and disassembly. To avoid electrical shock, the assembly must be used according to the order of the earth conductor,
the traction line to the power line, the disassembly of the power line, the null line to ground lead
2. Make sure all screws are locked during installation.
3. Do not touch the blades in case the fan starts.
4. The device must be permanently connected to the power supply via a double pole switch with a contact separation of at least 3 mm in all poles.
5. Do not connect the ceiling fan to a dimmer or regulator.
6. The ceiling fan must be mounted at a minimum height of 2.5 m from the floor and 3 0.5 m from the wall.
7. Do not install in areas / places near chemicals and flammable such as gas stove, places, wet and high humidity, such as bathroom, high vibration or
impact and continuous direct exposure to the wind.
8. Do not place objects that obstruct the blades.
9. When all electrical connections are complete, store all wires carefully.
10. Make sure the screws and connection are tight until they fit snugly.
______________________________
__________ _____
_____
_