Hofmann geodyna 8200 Manual De Operador página 176

Tabla de contenido
176
Setting Parameters
Resolution of the unbalance amount readings
Resolution of the unbalance amount readings
Selecting the resolution of unbalance readings in
Selecting the resolution of unbalance readings
1 or 5 g, or 0.05 or 0.25 oz increments.
in 0.05 / 0.25 oz or 1 / 5 g, increments.
Normal*
Normal* =
0.25 oz (5 g) increments
Fine
=
0.05 oz (1 g) increments
Fine
The selected mode of operation can be
The selected operating mode can be acquired in
transferred to the permanent memory.
the permanent memory.
Suppression of minor unbalance amount
Suppression of minor unbalance amount
readings
readings
Off
=
Suppression off
On *
=
Suppression on
Off =
Suppression off
The selected mode of operation can be
On * =
Suppression on
transferred to the permanent memory.
The selected operating mode can be acquired in
the permanent memory.
Setting threshold value for unbalance
suppression in oz or gms
Setting threshold value for unbalance
Selecting the limit (threshold) value for suppression
suppression in grams or ounces
of minor unbalance readings in grammes, or
ounces. The unit (oz or gms) depends on the
Selecting the limit (threshold) value for suppression
settings made under "Measurement limit of the
of minor unbalance readings in grams, or ounces.
unbalance amount readings".
The unit of measurement depends on the settings
made under "Measurement unit of the unbalance
Ounces:
amount readings" (see below).
Range 0.25 to 2.00 oz
Unit of measurement grams:
Factory–adjusted to 0.25 oz
Range 3.50 to 20.0 g
Factory–adjusted to 3.5 g
Grammes:
Unit of measurement ounces:
Range 3.50 to 20.0 g
Range 0.25 to 2.00 oz
Factory–adjusted to 3.5 g
Factory–adjusted to 0.25 oz
The selected operating mode can be acquired in
The selected mode of operation can be
the permanent memory.
transferred to the permanent memory.
Measurement unit of the unbalance amount
Measurement limit of the unbalance amount
readings
readings
Selecting unbalance readings in grams or ounces,
Selecting unbalance readings in grammes or
active when the machine is switched on.
ounces, active when the machine is switched on.
GRAMS*
=
Ounze*
=
OUNCES
=
Gramm
=
The selected operating mode can be acquired in
The selected mode of operation can be
the permanent memory.
transferred to the permanent memory.
Number of revolutions for each run
Number of turns
5 to 20 revolutions possible for each run.
5 to 25 revolutions possible.
Factory–adjusted to 10.*
*
Factory–adjusted to 10.*
The selected operating mode can be acquired in
the permanent memory.
The selected mode of operation can be
transferred to the permanent memory.
Warning
Reducing the number of measurement revolutions
Note
will reduce the accuracy of measurement.
Reducing the number of measurement revolutions
will reduce the accuracy of measurement.
* = Factory adjusted mode
=
5 g ( 0 . 2 5 o z )
increments
=
1 g ( 0 . 0 5 o z )
increments
readings in grams
Readings in ounces
readings in ounces
Readings in grammes
Tabla de contenido

Solución de problemas

loading

Tabla de contenido