Engine Oil Replacement - RIEJU RS3 50 Manual Del Propietário

ENGINE OIL REPLACEMENT

CAUTION CAUTION
Place the moped on a flat and firm surface before performing
this operation.
Then he proceeds as follows:
1 - Remove the drain screw (B) make sure its drained completely
empty.
2 - Once empty set screw (B) back into its housing and tighten.
3 - Remove the cap from the fill hole (C), until the oil exit hole (A) level
or the amount of 750 cc, because if the motor has not been stripped
and rebuilt there is normally 50 to 70 cc left in inside.
ATTENTION ATTENTION
When you test the moped ensure that all caps are replaced.
80
RS3 50
C
B
MAINTENANCE