Checking And Topping Up Front Brake Fluid Level - RIEJU RS3 50 Manual Del Propietário

CHECKING AND TOPPING UP FRONT BRAKE FLUID LEVEL

ADVICE ADVICE
Place the motorcycle so that the tank is parallel to the
ground.
If for any reason you have to fill the brake fluid
proceed as follows:
1 - Remove the cap from the brake reservoir (A).
2 - Remove the rubber seal (B).
3 - Fill until the liquid exceeds the MIN mark on the viewing port (C).
Recommended fluid: DOT 4 Recommended fluid
ADVICE ADVICE
Ensure the rubber seal is replaced before refitting cap.
CAUTION CAUTION
To completely replace the fluid braking system
please contact your official RIEJU
68
RS3 50
RIEJU dealer.
A
B
C
MAINTENANCE