Steren AVS-400 Manual De Instrucciones página 2

Sistema de transmisión inalámbrica de audio
Idiomas disponibles

Idiomas disponibles

A
Receptor
IMPORTANT
Read this instruction manual carefully to avoid any malfunction.
The information shown in this manual serves only as a reference for the product.
Due to updates there may be differences.
Please check our website www.steren.com for the most recent version of this manual.
CAUTIONS
• Do not use the devices if it has suffered strong shocks, falls or any other damage.
• Do not use or store the devices in places where there are leaks, humidity or splashing water; It could cause a
malfunction or electric shock.
• This product is not intended for use by people (including children), whose physical, sensory or mental abilities
are different or reduced, or lack experience or knowledge.
• Children should be supervised to ensure they do not use the product as a toy.
To avoid interference, each transmission system has a different frequency; it is identified by a letter of the
alphabet (A-F). Check that the letter matches in the transmitter and the receiver.
Operation of this product is subject to the following two conditions: (1) this product or device may not cause
harmful interference, and (2) this product or device must accept any interference, including interference that
may cause undesired operation.
PLACING BATTERIES
1
Remove the cover of the
batteries compartment.
HOW TO USE
1
Insert the antennas into the
transmitter and into the receiver.
ANT
OFF/ON
Antenna
input
2
Install the
devices as
shown below:
Use this adapter (included) if it is necessary.
3
Turn on the devices.
Turn them off, when you stop using them.
Remove the batteries if you are not going
to use the devices for a prolonged period.
SPECIFICATIONS
Specifications may vary without previous notice.
Input: 3 V - - - (2 x AA)
Operating frequency: 200-271 MHz
Modulation: FM
Frequency response: 60 - 18 000 Hz
WIRELESS AUDIO TRANSMITTER
Instruction manual
2
Insert 2 AA batteries.
Be sure to correctly position of
the polarity.
Do not exceed 50 m of
distance between the devices.
Insert the
receiver
turn off
V0.0
3
Place again the cover.
transmitter
receiver
o
Insert the
transmitter
ANT
turn on
OFF/ON
AVS-400
0618m
loading