Speedlink Medusa 5.1 Surround Home Instrucciones De Manejo página 16

GB Green jack plug
Black jack plug
Red jack plug
Connect the headset connector to the 9 pin socket "G9" on the front side of the amp box.
Connecting to a 5.1 soundcard to the amp box
Note: Every soundcard has different methods of connection for the front, rear and centre audio channels. Before connecting the headset you should fi rst identify the connectors on your sound-
card. This will enable you to connect your headset correctly fi rst time around. The instructions that
came with your soundcard can help you.
Connect the supplied mains adapter to the amp box and then plug the adapter into the mains.
Connect the four jack plugs on one end of cable A2 (according to their colour coding) to the
inputs on "INPUT I" (green plug to the green socket etc.) on the rear side of the amp box.
Connect the other four jack plugs on cable A2 to the relevant connectors on your soundcard.
The cable uses the following colour coding:
Green
Black
Red
Pink
Connect the headset connector to the 9 pin socket on the front side of the amp box.
You can use the test program supplied with your soundcard to test the headset.
If necessary, adjust the volume using the volume control on the in-line remote.
Connecting to a 5.1 soundcard without using the amp box
Note: Every soundcard has different methods of connection for front, rear and centre audio chan-
nels. Before connecting the headset you should fi rst identify the connectors on your soundcard.
This will enable you to connect your headset correctly fi rst time around. The instructions that came
with your soundcard can help you.
It is possible that some older 5.1 soundcards will not be able to support the use of the headset
without the amp box. If the headset does not work correctly when connected directly to the sound-
card then please connect the headset using the amp box to the soundcard instead.
Connect the headset connector to the 9 pin socket on cable C.
Connect the four jack plugs on cable C to the relevant connectors on your soundcard. The
cable uses the following colour coding:
Green
Black
Red
Pink
You can use the test program supplied with your soundcard to test the headset.
If necessary, adjust the volume using the volume control on the in-line remote.
Connecting to a CD player
Connect the headset connector to the 9 pin socket on cable D.
Connect the speaker jack plugs to the sockets on the CD player
RCA Marking
FR (red RCA connector)
FL (white RCA connector)
RR (red RCA connector)
RL (white RCA connector)
WF (red RCA connector)
CE (white RCA connector)
Front speaker
Rear speaker
Subwoofer und Centre speaker
Microphone
Front speaker
Rear speaker
Subwoofer und Centre speaker
Microphone
Connector on DVD player
Front Right
Front Left
Rear Right
Rear Left
Subwoofer
Centre
16