HQ-Power VDPC146 Manual Del Usuario página 5

Front panel (image A)
18 STEP
19 AUDIO
20 HOLD
21 PARK
22 REC EXIT
23 RECORD
24 PAGE
25 MODE SELECT
26 DARK
27 ALL REV
28 0% or 0-255
29 REV ONE
30 CHASE REV
31 BEAT REV
Back panel (image B)
1 Power input
2 MIDI THRU
3 MIDI OUT
4 MIDI IN
5 DMX OUT
6 DMX POLARITY
7 AUDIO INPUT
8 REMOTE
5.2 Connections
The manufacturer is not responsible for damage caused by improper connections.
Connect the supplied adapter with the DC jack and connect the other end with a mains outlet.
•
Plug the XLR cable into the device and connect the other end with the first device you wish to control.
•
Plug the MIDI cables into the appropriate MIDI sockets.
•
6. Programming
6.1 Leaving the Recording Mode
1. Hold the RECORD button.
2. Press the REC EXIT button.
3. Release the RECORD button.
V. 02 – 21/10/2013
VDPC146
12-20Vdc / 500mA
used to transmit MIDI data received on the MIDI IN connector
3-pin female XLR
select the polarity of the DMX OUT
RCA (cinch) line in 100mV, 1Vp-p
FULL ON and BLACKOUT can be controlled from a distance using a ¼" stereo jack
(6.35mm)
Press this button to advance step by step in a
programme. (speed slider should be in the lowest
position: SHOW MODE)
Press this button to access the audio control mode.
Hold this button to stop the chase.
In DOUBLE PRESET, pressing PARK B activates the
maximum value for MASTER B. In SINGLE PRESET,
pressing PARK A activates the maximum value for
MASTER A.
Press this button to add or kill a channel. The LED
indicator is lit when the device is in kill mode. Press
an arbitrary flash button to reduce all channel output
levels to zero, with the exception of the selected
channel. This button also deactivates the recording
mode.
Press this button to record a step in a programme.
Select the desired scene or chase on the selected
page (1 – 4).
In the CHASE/SCENES mode, you can press this
button to choose between the DOUBLE PRESET or
SINGLE PRESET mode.
For a blackout of all channels, including the ones that
are currently in FULL ON and FLASH mode.
Reverses the direction of a chase.
Switches the display from 0-100% to 0-255 and vice
versa.
Hold this button and press any button of PRESET B.
The selected scene will now chase in reverse.
This button enables you to reverse the chase
controlled by the SPEED slider.
This button enables you to reverse the chase to the
beat of the music.
5 ©Velleman nv