Attaching The Base Stand To The Lcd Monitor; Connect Video Cables To A Computer; Important - Westinghouse LCM-19w4 Manual Del Usuario

Installation

1. Attaching the Base Stand to the LCD Monitor

Attach the base stand to the LCD monitor stand neck by aligning the holes and tabs.
Press in and snap the base into place. To remove the base stand, press the tabs on the
bottom of the stand neck and remove the base.
2.

Connect Video Cables to a Computer

Connect one of the following into the back of the LCD Monitor:
IMPORTANT: Before beginning,
turned off.
DVI-D CONNECTION:
Monitor DVI-D port.
VGA CONNECTION:
port to the LCD Monitor D-SUB port.
make sure the monitor and computer are
Connect a Digital DVI cable from your computer to the LCD
Connect an analog VGA cable from your computer VGA OUT
9