6. If you want to modify the previously selected options,
press "Back". If not, press "Install" to install all the selec-
ted options.
Note: This last step doesnçt appear under Windows Vista
or W7
7. Once the installation finishes, click on "Finish".
8. Device connection
1. Connect the device or the USB stand to an available USB port of your computer. It will be recognized and installed by
the Windows installation wizard automatically.
2. Access to the device through "Start" menu > "Ralink Wireless Utility" or through this icon located in the Windows
bar.
- Windows XP operating system
- Windows Vista operating system
- W7 operating system
The icon colour changes depending on the device status:
When the icon is blue, means that it is not connected to a network.
When the icon is green, means that it is connected with good signal coverage.
When the icon is yellow, means that it is connected with normal signal coverage.
When the icon is red, means that it is connected with bad signal coverage.
When the icon is black, means that there isn´t any network device detected.
SNT1016 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI
utility
9.3 Add the network connection to a
profile
9.4 Network connection with WPS
10.MAC address specifications
Important Information
English
14