Idiomas disponibles
Idiomas disponibles
iFP
Lock Introduction
Thanks for your choice of the Fingerprint & Keypad door lock of iTEC
Company. This door lock has powerful function: can be unlocked by
Fingerprint, Password and Mechanical key. There are different levels
(Mater User and Normal User) for Fingerprint User and Password User.
The Master User can add new user and delete user. This lock can support
up to 5 Fingerprint Master Users, 50 Fingerprint Normal Users and 5
Password Master Users, 50 Password Normal Users.
Lock Part Diagram
Lock Setting Process
Reset - Add Master/ User - Add Normal/ User - Unlock
Note: If the password you input is less than 12 digits, please press '#' to end.
Reset:
Reset the lock means initializing the information of the lock. After resetting the lock, all the Fingerprint
Users and Password Users will be deleted, a new Temporary Password User with password '11111111' (8
times 1) will be created at the same time. You can use the Temporary Password User to add the first Master
User and unlock temporarily. The Temporary Password User will be invalid once you add a Master User
successfully.
OPERATION
1- Disassemble the front lock cover.
2-Press the Reset Button 'S1' for 1 second. --> Buzzer: 'Beep' , keypad blue light on.
3-When hear 'beep' , release the Reset Button at once.--> Buzzer: 'Beep-du, Beep-du...'
4-Press '#' key and hold, when hear one 'Beep' , release '#' key Buzzer: 'Beep, Beep-->' , reset successfully
Note:
-Make sure the lock is in standby state before resetting operation.
2
www.itec.com.pt
