Radio Operation - HAEGER Snoozer RA-06B.005B Manual De Instrucciones

English
NOTE: While volume of buzzer alarm is fixed and cannot be adjusted, the volume,
band and frequency of radio alarm are preset as last tuned. When the radio alarm
sounds, you can also adjust the listening level by VOLUME Λ (3) / V (4) buttons. To
select the station, refer to "Radio Operation".
REVIEW THE ALARM TIME
In standby mode, press and hold AL1 (3) button for ALARM 1 or AL2 (4) button for
ALARM 2 for about 2 seconds, then the alarm time setting will blink in the display.
Press AL1 (3) (for ALARM 1) or AL2 (4) (for ALARM 2) again to return to the clock time
display.
SNOOZE FUNCTION
When the alarm is sounding, press SNOOZE (10) button to stop the alarm
temporarily. The AL1/AL2 buzzer indicator (14)/(16) or AL1/AL2 radio indicator
(15)/(17) will keep blinking while the snooze function is in operation, and the alarm
will sound again after about 9 minutes. To stop the alarm, press the RADIO ON/OFF
(1) button once. The alarm indicator will become solid and the alarm will function at
the same time on the next day.

RADIO OPERATION

LISTEN TO THE RADIO
1. Press RADIO ON/OFF MODE (1) button to turn on the
radio.
2. The default frequency 87.5 (MHz) (FM mode, for first
use) or the last tuned frequency (AM or FM mode) will be
displayed.
3. Press BAND (11) button to select the band.
4. Automatic tuning - Press and hold TUNING Λ (6) / V (7) button for about 2
seconds until the frequency displayed move up or down. Release the button.
The tuner will scan and stop for the first strong station. Repeat until the desired
station is reached.
5. Manual fine-tuning - Press TUNING Λ (6) button / V (7) button repeatedly to
adjust the frequency by each step.
VOLUME CONTROL
In radio mode, press the VOLUME Λ (3) / V (4) button to adjust the volume level.
6 Instructions for use