Preparation Of The Compressor To Start Operation; Compressor Unpacking; Checkup - Prematic AIRSTAR 45 Manual De Instrucciones

Preparation of the compressor to start operation

Preparation of the compressor to start operation

Compressor unpacking


Compressor unpacking is carried out by two workers.
1
Save the packing material.

Checkup

 In particular check the following:

If the safety valve is faultless?

If the air filter is set on the cylinder head?

If the oil level is enough?

If the connection to power supply is in order?

Scratches on the casing are not a failure.
 Do not connect faulty compressor to the power supply.
 Before starting the operation of the compressor refer to employees the service so they carry out the
repair.
ATTENTION!
Damaged pressure lines can be broken and the stream of compressed air-out can inflict property
damage.
 Before connecting check the compressor and pressure lines on damages.
10
WARNING
Do not allow children to play with the packaging film, there is a danger of
suffocation.
 Do not allow children to play with the packaging film.
 Packing material keep out of children's reach.
WARNING
Risk of accidents by using faulty compressor.
 Check condition of the compressor before each use.
 Make sure that the compressor is in perfect condition.
CAUTION
Damaged pressure lines can be broken, it lead to injury.
 Before connecting check the compressor and pressure lines on damages.
 Place the box in front of you.
2

Open the top cover of the box.
 Hold tight the box by carrying holes (1).
 Carefully remove the compressor
from package (2) and place it in front of you.
 Remove all packaging material
from compressor.