Delay Start - Sears Kenmore 587.1510 Manual De Uso Y Cuidado

Operating Instructions
(continued)
Sanitize Option
To sanitize your dishes and glassware, select the
SANITIZE option. When selected, the light above the pad
will come on and remain on until end of cycle. The water
temperature in the final rinse will be raised to 155°F (68°C) and will maintain that temperature for 9 minutes.
This option is available in HEAVY, NORMAL and ECO
WASH cycles. Only these sanitization cycles have been
designed to meet NSF requirements.
The cycle time will be extended until the proper water
temperature is reached. Washing action will continue
during the water heating delay. For best results, the
incoming water temperature should be at least 120°F
(49°C).
The sanitize criteria may not be satisfied if there is an
interruption of the cycle, power failure or if the incoming
water temperature is below 120°F (49°C).
To turn off the SANITIZE option, press the pad a second
time. The light above the pad will turn off.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the desired
cycle.
Delay Start
The DELAY START option allows you to automatically
delay starting your dishwasher from 2-4 or 2-4-6 hours
depending on your model.
On models with 2-4-6 hour delay, press the pad once for
a 2 hour delay, twice for 4 hours and three times for 6
hours. A light will come on
indicating the delay start hours and will remain on until
cycle starts.
To cancel the DELAY START option and begin the cycle
before the delay period is over, press the START/
CANCEL pad.
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock the Q
dishwasher controls by pressing and releasing the HEAT ...........
DRY pad for 3 seconds while the door is latched. An
indicator light on the lock graphic pad will illuminate
when the controls are locked and no new selections can
be made until the lock is released. To unlock the
controls, press the HEAT DRY pad until the indicator
light goes out.
Options Time (approx.)
Hi- Temp Wash
Heat Dry
Sanitize