Secure Dishwasher In Cabinet Opening - KitchenAid KDTM404KBS Manual Del Propietário

SECURE DISHWASHER IN CABINET
OPENING
39.
Double-check dishwasher alignment
in cabinet opening
Check that dishwasher is still level front to back and side-to-side
in the cabinet opening.
Open dishwasher door and place towel over pump assembly and
spray arm of dishwasher. This will keep screws from falling into
pump area when you are securing dishwasher to cabinet.
40.
Secure dishwasher
Screw to side
cabinet
Open dishwasher door to prepare for securing the dishwasher
to the countertop or side cabinet.
NOTES:
The dishwasher must be secured to keep it from shifting when
■
the door is opened or closed.
Do not drop screws into bottom of dishwasher.
■
Locate brackets installed in the "Choose Anchor Attachment
■
Method" section, either on top or on the sides of the dishwasher.
If countertop anchoring: Secure dishwasher to the countertop
■
with two Phillips-head screws (included).
If side anchoring: Drill pilot holes in cabinet to avoid splitting
■
the wood. Secure dishwasher to cabinet with two Philips-head
screws (included). Remove upper rack for easier access. See
the Quick Start Guide for instructions on how to remove the
upper rack if needed.
41.
Check door clearance
IMPORTANT: Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs or use the
side attachment option.
42.
Check inner spacing
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws and shift tub. Tighten bracket screws.
43.
Direct Wire Connection
To complete direct wire connection. Complete Steps 18 to
24 in this installation guide.
Once complete, return here to Step 44 to complete Product
Installation.
23