Triton Blue 7R Beam Pro Manual De Usuario página 22

s
et disPlay
Light support 2 language, rotation display, enter page as shown in Figure 9 to set parameter following:
» LANGUAJE: Select display as simplified Chinese or English.
» SCREEN SAVER: When panel is idle(these is no operation in 10 second), displayer will enter
saver status. When set as "mode 1" , saver status is close display, as " mode 2" saver status will
display DMX address code (DMX MODE) or display LOGO (AUTO RUN or SOUND CTRL). As "OFF",
keep light up displayer and show main menu.
» SCREEN ROTATION: Rotate displayer.
» TOUCH ENABLE: Disable or enable touch function, when disable, use encoder to operate light
and set parameter.
» TOUCH ADJUST: Adjust touch function, normally, not enter this item.
t l
est ight
Enter the page as shown in Figure 10, light will into test mode, in this mode, the light does not receive the
data for DMX controller.
» PAN: range for 0 to 255
» TILT: range for 0 to 255
» FOCUS: range for 0 to 255
» COLOR: range for 0 to 255
» GOBO: range for 0 to 255
» PRISM: range for 0 to 255
» FROST: range for 0 to 255
» STROBE: range for 0 to 255
22.
User Manual | 7R BEAM PRO Triton Blue | Rev. May.2015 | www.triton-blue.com