Power Source; Basic Function; Using The Radio - Trevi CMP 542 USB Manual De Uso E Instalación

CMP 542 USB

POWER SOURCE

This unit is designed to be operated on AC/DC.
AC OPERATION
POWER SOURCE
Plug the smaller end of AC power cord into AC jack on unit and the other bigger end into AC wall
outlet. The batteries will be automatically disconnected.
This unit is designed to be operated on AC/DC.
AC OPERATION
DC OPERATION
Plug the smaller end of AC power cord into AC jack on unit and the other bigger end into AC wall
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs 1.5V UM-2/C size batteries (not included)
outlet. The batteries will be automatically disconnected.
into compartment. Please follow correct polarities as indicated.
CAUTION:
DC OPERATION
Remove batteries if they are flat or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly. Open the BATTERY COMPARTMENT DOOR. Install 6 pcs 1.5V UM-2/C size batteries (not included)
into compartment. Please follow correct polarities as indicated.

BASIC FUNCTION

CAUTION:
Remove batteries if they are flat or not being used for a long period of time.
SWITCHING ON THE UNIT Batteries contain chemical substances, so they should be disposed of properly.
After connecting the AC power, set the FUNCTION switch to CD/MP3/USB or RADIO, the POWER
BASIC FUNCTION
indicator will illuminate.
NOTE:
In CD/MP3/USB position, when the unit is not providing the main function for 15 minutes,
SWITCHING ON THE UNIT
the unit will automatically switch into standby mode.
ESD hints
– The product maybe reset or not reset to operation of control due to electrostatic
After connecting the AC power, set the FUNCTION switch to CD/MP3/USB or RADIO, the POWER
discharge, just switch off and reconnect again.
indicator will illuminate.
NOTE:
In CD/MP3/USB position, when the unit is not providing the main function for 15 minutes,
TO ADJUST VOLUME
the unit will automatically switch into standby mode.
ESD hints
– The product maybe reset or not reset to operation of control due to electrostatic
Rotate the VOLUME CONTROL right or left to increase or decrease volume.
discharge, just switch off and reconnect again.
HEADPHONES
For private listening, plug the headphones/earphones (not included) into PHONES jack(3.5 mm
TO ADJUST VOLUME
diameter).
Rotate the VOLUME CONTROL right or left to increase or decrease volume.
CAUTION: Long time listening with headphones/earphones at high volumes may cause harmful
HEADPHONES
damage to users' ears.

USING THE RADIO

For private listening, plug the headphones/earphones (not included) into PHONES jack(3.5 mm
diameter).
1. Move the FUNCTION switch to RADIO position . CAUTION: Long time listening with headphones/earphones at high volumes may cause harmful
2. Tune to required station by rotating the TUNING KNOB.
damage to users' ears.
To avoid possible hearing damage, limit the time listening at high volumes
3. Rotate the VOLUME CONTROL to comfortable volume level. USING THE RADIO
1. Move the FUNCTION switch to RADIO position .
4. Extend the TELESCOPIC ANTENNA to its full length and gently rock the unit back and forth
2. Tune to required station by rotating the TUNING KNOB.
to get the best reception, or place the unit in an open place.
5. Turn off the radio by switching the FUNCTION switch to "OFF" position
3. Rotate the VOLUME CONTROL to comfortable volume level.
Note: The FM STEREO indicator will be on if you are receiving FM stereo program.
4. Extend the TELESCOPIC ANTENNA to its full length and gently rock the unit back and forth
to get the best reception, or place the unit in an open place.
5. Turn off the radio by switching the FUNCTION switch to "OFF" position
Note: The FM STEREO indicator will be on if you are receiving FM stereo program.
3
9
ENGLISH