Initial Power Up; Controller Interface Display Icons; Sensor Status; Environmental Conditions - Rain Bird WR2 Serie Manual Del Usuario

Initial Power Up

After power is applied, the Controller Interface
displays the following icons.
Controller Interface
Display Icons

Sensor Status

Battery Life Remaining:
Four (4) dark bars
indicate full battery
strength. Replace battery
when only one (1) bar
remains.
Signal Strength:
Illustrates strength of
the radio signal between
Sensor and Controller
Interface. Four (4) dark
bars indicate maximum
signal strength.
Sensor Indicator /
Pairing Status: The
Sensor and Controller
Interface synchronize
communication
addresses. Battery Life
and Signal Strength will
flash while synchronizing,
and then stop when
paired.
4
WR2 Wireless Sensor • www.rainbird.com/WR2
WR2 user manual (637469-01) EN ESMX FRCA.indd 4

Environmental Conditions

Rainfall Set Point:
Select from six (6) set points
ranging from 1/8" (3mm) to
1/2" (13mm). A set point closer
to the top of the icon allows
for more precipitation to occur
before irrigation is suspended.
Rainfall Indicator:
Illustrates approximate amount
of rainfall relative to Rainfall Set
Point.
Rainfall Trip Indicator:
Displays when the Sensor has
suspended irrigation due to
"Quick Shut Off " or satisfying
rainfall set point.
Temperature Set Point
(Rain/Freeze Sensor only):
Select from three (3) set points:
33°F (0.5°C), 37°F (3°C), or 41°F
(5°C). Selecting a lower set
point allows irrigation at lower
temperatures.
Temperature Indicator
(Rain/Freeze Sensor only):
Illustrates approximate
temperature relative to
Temperature Set Point.
Temperature Trip Indicator
(Rain/Freeze Sensor only):
Only displays when the Sensor
has suspended irrigation due
to temperature reading that
is below the temperature set
point.
2/23/2018 8:09:24 AM