Basic Operation; Answering A Call; Making A Call; Edial - RCA H5400 Manual De Uso

2. Press the SELECT/SAVE or STORE button to select.
3. Press the 3 or 4 button on the handset to select YES.
4. Press SELECT/SAVE to confirm. The display will show
REGISTER....
5. On the base, press and hold the PAGE button for 3
seconds. If the registration is successful, the handset
will emit a long beep.
6. If the registration fails, FAIL! TRY AGAIN will show on
the display. Please repeat the above steps.

Basic Operation

Answering a Call

1. Press the TALK button on the handset. (The base
displays CORDLESS H/S IN USE).
2. When finished, press the TALK button or replace the
handset in the charge cradle, to hang up.

Making a Call

1. Press the TALK button to access an available line
automatically,
If you want to select a desired line, press LINE button
plus a number button (1-4) to select the desired line.
2. Wait for a dial tone then dial the desired number.
3. When finished, press the TALK button or replace the
handset in the charge cradle, to hang up.
NOTE: If the line you selected is occupied by other users,
the message "LINE IN USE" will be shown. You can press
the SELECT/SAVE button to confirm selection of this line.
If you want to select another line, press the LINE button
plus the number button again.
Redial
To quickly redial the last number you entered (up to 32
digits):
1. Press TALK button.
2. Press the FORMAT/REDIAL button.
Volume Adjust
Adjust the receiver volume by pressing the Volume Up/
Down button (located at the side of the handset) when
you are in talk mode. There are four volume levels, and
each press of the Volume Up/Down button adjusts the
receiver volume by one level.
Telephone Operation
OR
1