Tabla de contenido
7
EDIT/CHECK
'Bl
8
REC/REC M UTE
z
i
DIRECTION < } PRESET
/0
e
PROGRAMMED
EDIT RECORDING
4
5
6
7
8
Press the numeric buttons to designate the tape
length.
10 to 99 minutes can be specified. ,
Example: When using a 60-minute tape, press the 6 and O
buttons.
DISPLAY
@ Tape length
@ Tape side A (front side)
@ Maximum recording time for side A
Press one of the DISC DIRECT PLAY buttons to
select a disc and press the numeric buttons to
program a track.
Example: To select the 10th track of the disc 2, press DISC
DIRECT PLAY 2, numeric buttons +1O and O.
DISPLAY
@ Remaining time of side A
@ Total number of programmed tracks
@ Programmed tracks
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Press the EDIT/CHECK
button to select side B
and program the tracks for side B.
After confirming B on the display, repeat step 5.
First press the
/0 REC/REC MUTE button and
then press the +>
button within 2 seconds to
start recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and then
recording starts. After recording on the front (side A) ends,
recording on the back (side B) starts.
To
stop recording
Press the
button. Recording and CD play stop simultaneously.
To check the order of the programmed
track numbers
+m
Before recording, press the EDIT/CHECK button to select side
A or B, and press the +
or -
button repeatedly.
DISPLAY
@ Program number
@ Track number
@ Programmed track numbers
To change the program of each side
Press the EDIT/CHECK button to select side A or B, and press
the
CLEAR button to clear the program of the selected side.
Then program tracks again.
To clear the
edit program
Press the
button twice so that "EDIT" disappears on the display.
m
Recording is inhibited if the erasure prevention tab on either side
of the tape is broken off.
46
Tabla de contenido
