Specifications; Maintenance And Repairs - Stihl FH Manual De Instrucciones

English
Definitions
1 Cutting Blades
Steel blades for cutting hedges and
shrubs.
2 Blade Drive Gear
Converts rotary movement of angle
drive into reciprocating movement
of cutting blades.
3 Drive Tube
Encloses and protects the drive
shaft between the coupling sleeve
and gearbox.
4 Sliding Sleeve
Locks and unlocks the cutter bar
adjusting mechanism.
5 Adjusting Lever
Used to set cutter bar to the
required angle.
6 Quadrant
Locks the cutter bar in the required
position.
7 Blade Scabbard
Covers cutting blades when hedge
trimmer is not in use.
20

Specifications

Cutting blades
Type: Double-
edged for
bidirectional
cutting
Cutting length: 250 mm
(9.843 in)
Tooth spacing: 34 mm
(1.339 in)
Tooth height: 22 mm
(0.866 in)
Sharpening angle: 45° to
horizontal
Weight
Attachment: 1.5 kg (3.3 lbs)

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.
FH