Edge Triggering; Description - Promax OS-782 Manual Del Usuario

USER'S MANUAL. OS-782

4.14.1 Edge triggering

The Edge triggering menu is described in the following table.
Function menu
Slope
Signal source
1/2
2/2
Bloqueo
Trigger mode
Coupling
Term interpretation
Trigger modes: There are three kinds of trigger modes available for this
oscilloscope, that is, auto, normal and single shot.
Page 29
Settings
Rise
Fall
CH1
CH2
Auto
Normal
Single shot
AC
DC
HF Suppression
LF Suppression

Description

Triggering on the rise edge of the
signal.
Triggering on the fall edge of the
signal.
CH1 is used as the trigger source.
CH2 is used as the trigger source.
To next menu.
Back to previous menu.
To holdoff menu.
Acquisition of waveforms
possible even if there
triggering condition detected.
Acquisition of waveforms can only
be done when the
condition is satisfied.
The sampling is performed on a
waveform when one trigger is
detected, then stop sampling.
With this mode selected, the DC
component is prevented
passing-though.
All dc components are allowed.
The HF part of the signal is
prohibited and only
component is allowed.
The LF part of the signal is
prohibited and only
component is allowed.
is
is no
triggering
from
the HF
the LF
02-2010