Canon EOS Rebel T7 Manual De Instrucciones Básicas página 29

Tips for Using the Battery and Charger
Upon purchase, the battery is not fully charged.

Charge the battery before use.
Recharge the battery on the day before or on the day it is to be

used.
Even during storage, a charged battery will gradually drain and lose
its capacity.
After recharging the battery, detach it and disconnect the

charger from the power outlet.
When not using the camera, remove the battery.

If the battery is left in the camera for a prolonged period, a small
amount of power current is released, resulting in excess discharge
and shorter battery life. Store the battery with the protective cover
(provided) attached. Storing the battery when it is fully charged may
lower the battery's performance.
The battery charger can also be used in foreign countries.

The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
If the battery becomes exhausted quickly even after being fully

charged, the battery has reached the end of its service life.
Purchase a new battery.
After disconnecting the charger's power plug, do not touch the prongs for

at least 3 sec.
Do not charge any battery other than a Battery Pack LP-E10.

Battery Pack LP-E10 is dedicated to Canon products only. Using it with

an incompatible battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
Charging the Battery
27